Product Search Results

Atwood Power Trailer Jack with Cover and Foot - 3500 lbs
Atwood Power Jacks use a powerful 12 volt weather resistant DC motor with slip resistant clutch which is protected by a rugged polyethylene cover. The jack is permanently lubricated and features a detachable foot pad on a high strength, zinc plated and black powder coated tube. This model also features…

Trailer Jack, Atwood Top Wind Snap Ring Mount Jack - 2000 lbs.
Atwood Snap Ring Trailer Jacks swing either direction to a position parallel with the tongue. The spring loaded double-lock pin secures the jack in an up or down position. * 2,000 lbs. capacity * 10" lift * 11-1/2" bracket height * 15" retracted height * Jack foot included * Weld-on mounting bracket…

Pull Pin, Easy Swivel Trailer Jack with 6" Dual Wheels - Sidewind - 1,500 lbs.
…Jack, Sidewind Swivel Jack with 6" Dual Wheel - 1,500 lbs. When hitching and unhitching loaded trailers, D-L tongue jacks are real back savers. These easy to install smooth operating tongue jacks can be mounted in a variety of ways on various sizes of trailer tongues. Heavy duty D-L tongue jacks reduce…

Atwood Deluxe Power Trailer Jack W/ Cover and Foot - 2500 lbs
Atwood Power Jacks use a powerful 12 volt weather resistant DC motor with slip resistant clutch which is protected by a rugged polyethylene cover. The jack is permanently lubricated and features a detachable foot pad on a high strength, zinc plated and black powder coated tube. The deluxe model also…

Fulton F2 Swing-Up Trailer Jack, Dual 7" Wheels, Sidewind, Bolt-On - 1,600 lbs
…9/16"* Capacity: 1,600 lbs* Lifetime limited warranty Please note: Wheel stop does not come standard. 1413020134 Fulton F2 Marine and Recreational Jack for 3" x 3" and 3" x 4" Frames, Sidewind, Twin Track, 1,600 lbs

Shelby Weld-On Trailer Jack, Sidewind Swivel with 8" Wheel - 1,500 lbs.
…swivel jack is a bolt-thru design (called OSD) with the jack tube offset from the bolt to allow easier access for mounting. Also engineered with a 6 degrees camber to keep the jack centered under the tongue. Zinc coated with "supersealer" for added corrosion resistance. Fits 3" to 5" tongues. The new…

Stabilizer Jack - 1,000 lbs
…,000 lbs * Easy-to-use, fold-down jack for stabilizing and leveling trailers * Flips down for stabilizing, flips up for travel * Adjustable height * Optional handle rod (sold separately) can be used to easily fine tune height * Attach to trailer ends, frame or tongue * Bolt-on or weld-on installation…

A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson
1,000 lb Sidewind A-frame Jack* 1,000 lb. A-frame jack* 15" travel* 29-3/4" maximum tongue height* Can be welded or bolted to standard A-frame couplers* Zinc plated TUFFPLATE finish for a longer life* Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc…

Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 800 lbs. by Dutton-Lainson
Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 800 lbs. When hitching and unhitching loaded trailers, D-L tongue jacks are real back savers. These easy-to-install smooth operating tongue jacks can be mounted in a variety of ways on various sizes of trailer tongues. Heavy-duty D-L tongue jacks reduce…

Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs. by Dutton-Lainson
Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1,000 lbs. When hitching and unhitching loaded trailers, D-L tongue jacks are real back savers. These easy-to-install, smooth-operating tongue jacks can be mounted in a variety of ways on various sizes of trailer tongues. Heavy duty D-L tongue jacks reduce…

Pull Pin, Easy Swivel Trailer Jack with 8" Wheel - Sidewind - 1,500 lbs. by Dutton-Lainson
Trailer Jack, Sidewind Swivel Jack with 8" Wheel - 1,500 lbs. When hitching and unhitching loaded trailers, D-L tongue jacks are real back savers. These easy to install smooth operating tongue jacks can be mounted in a variety of ways on various sizes of trailer tongues. Heavy duty D-L tongue jacks reduce…

Trailer Jack Wheel Dock
…, grass, and even muddy locations. No more sinking in the mud. No more dents in the driveway. Easy lift with rope handle. * Stabilizes Jack Wheel * 1000 lbs. Tongue Weight Capacity

Weight Distribution Chain Hanger Kit - Clamp On
…chains, simply raise the trailer tongue and rear of vehicle with the trailer jack. * Space saving design allows for more room on the trailer frame for other items - toolboxes, gas tanks, jacks etc. * Includes two (2) brackets - one for each side of trailer tongue * Includes mounting hardware * Fits…

Shelby Bolt-On Trailer Jack, Sidewind Swivel with 8" Wheel - 1,500 lbs.
Shelby Trailer Jack with large 8" wheel * 1,500 lbs. capacity * Offset Swivel Design permits easier access to the nut and bolt on the bolt-thru swivel * 6 degrees of camber allows the jack to remain centered underneath the trailer tongue, when the jack is fully extended * Zinc plating and "Super Sealer…

Single Bar Weight Distribution Kit for A-Frame
…the trailer. This system works with both side- and center-mounted tongue jacks. The sway control platform allows you to put a friction sway control on either side of the trailer. * Has bolt-together welded head * Designed for tongue weights 100 - 400 lbs * Rated up to 4,000 lbs gross towing weight distributing…

High Performance Reese SC Weight Distribution System, 1,200 lbs TW / 12,000 lbs GTW
…distribution on uneven roads and in many different weather conditions* Lift handle accessory included to reduce the amount of lifting required by the trailer jack when the weight distribution system is preloaded* Automotive friction material provides consistent friction in all weather conditions* Large friction…

High Performance Reese SC Weight Distribution System, 1,500 lbs TW / 15,000 lbs GTW
…distribution on uneven roads and in many different weather conditions* Lift handle accessory included to reduce the amount of lifting required by the trailer jack when the weight distribution system is preloaded* Automotive friction material provides consistent friction in all weather conditions* Large friction…

Weight Distribution 350 Mini for Fleetwood and Jayco Trailers with Swing-Up Jacks
…and fold-down campers, especially for Fleetwood/Coleman trailers that have a side mounted swing away jack. * Does not require snap-up brackets * Works with any 2" receiver hitch * Designed for tongue weights 100 - 350 lbs * Maximum towing weight: 3,500 lbs * Has 2" hitch ball, adjustable hitch bar, spring…

High Performance Reese SC Weight Distribution System, 800 lbs. TW / 10,000 lbs. GTW
…distribution on uneven roads and in many different weather conditions* Lift handle accessory included to reduce the amount of lifting required by the trailer jack when preloading the weight distribution system* Automotive friction material provides consistent friction in all weather conditions* Large friction…

High Performance Reese SC Weight Distribution System, 600 lbs. TW / 10,000 lbs. GTW
…distribution on uneven roads and in many different weather conditions* Lift handle accessory included to reduce the amount of lifting required by the trailer jack when the weight distribution system is preloaded* Automotive friction material provides consistent friction in all weather conditions* Large friction…

Trailer Jack Wheel Lock with Mounting Bolt and Cam by Dutton-Lainson
Tongue Jack Wheel Lock* Wheel lock fits most jacks with 6" wheel* Grips wheel to eliminate wheel roll* Step on one end to lock, opposite end to release* Kit includes locking lever, cam and mounting bolt* Mounting bolt measures 1/2" diameter x 3-1/2" long* Made in the USA 22547 Tongue Jack Wheel Lock…

Replacement Dual Poly Wheel for Dutton-Lainson Model 6800 Swivel Jack
Replacement Wheel for Jacks Dual poly wheel for model Dutton-Lainson Model 6800 trailer tongue swivel jack. Made in the USA. 22441 Replacement Wheel for Jacks by Dutton-Lainson Model 6802

Replacement Handle for Dutton-Lainson Sidewind Style Trailer Jacks - 600 - 1,000 lbs. (1996 and Newe
Replacement Jack Handle, Side Wind* For 6400A or 6700A series tongue jacks manufactured after 1996 (date code after 4296)* Jacks with 600 lb to 1,000 lb capacity* Made in the USA 22446 Replacement Jack Handle, Side Wind by Dutton-Lainson Model 6810A

Single Bar Weight Distribution for Pole Tongue Trailers
…distributing system is especially designed for use with lighter-weight trailers with a single-pole straight tongue. The center mount single bar is contoured to avoid interference with center mounted jacks. Easy to set up and use. The lift mechanism is designed to prevent interference with gas bottles or battery…