Search: Trailer Identification Lights   >  

This waterproof identification light bar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design. DOT approved.

• Clearance Lights
• ID Bar
• Red
• 15-15/16L x 1-1/2W Inch
• Surface Mount
• Rear Clearance
• Submersible Lights
• Optronics

15-9/16" L x 1-3/16" W x 1-5/16" D; Three separate lights on the base; lights have replaceable lenses and bulbs; surface mount on 6-1/8" centers; 1-wire; total of 3 incandescent bulbs

• Clearance Lights
• ID Bar
• Red
• 15-9/16L x 1-3/16W Inch
• Surface Mount
• Rear Clearance
• Non-Submersible Lights
• Optronics

16-5/8" x 1" x 1-7/16". Incandescent identification light bar is designed for trailers wider than 80". Durable powder-coated white base. Surface mount to trailer - hardware not included. 1-Wire design. (3) 194 bulbs.

• Clearance Lights
• ID Bar
• Red
• 16-5/8L x 1-7/16W Inch
• Surface Mount
• Rear Clearance
• Non-Submersible Lights
• Peterson

This waterproof identification light bar with 3 incandescent lights is 14-1/4" long and designed for trailers wider than 80". Durable stainless steel base. Surface mount to trailer - hardware not included. Single wire plug-n-go connection.

• Clearance Lights
• ID Bar
• White
• 14-1/4L x 1-3/16W Inch
• Surface Mount
• Rear Clearance
• Submersible Lights
• Optronics

17" Long x 1-3/8" tall x 1" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.

• Clearance Lights
• ID Bar
• Red
• 17L x 1-1/2W Inch
• Surface Mount
• Rear Clearance
• Submersible Lights
• Optronics

17" x 1-1/2" x 1-9/16". This LED light bar serves as a rear clearance identification light on trailers. Surface mount - hardware not included. P2 rated.

• Clearance Lights
• Oval
• Red
• 17L x 1-1/2W Inch
• Surface Mount
• Rear Clearance
• Non-Submersible Lights
• Custer

16-3/4" Long x 1-3/8" tall x 1-1/4" thick. Waterproof, incandescent identification light bar is designed for trucks and trailers. Durable steel base with white finish. Surface mount. 1-Wire design. P2 rated. (3) 194 bulbs.

• Clearance Lights
• ID Bar
• Red
• 16-3/4L x 1-3/8W Inch
• Surface Mount
• Rear Clearance
• Non-Submersible Lights
• Optronics

16-5/8" x 1" x 1-7/16". Incandescent identification light bar is designed for trailers wider than 80". Durable powder-coated white base. Surface mount to trailer - hardware not included. 1-Wire design. (3) 194 bulbs.

• Clearance Lights
• ID Bar
• Amber
• 16-3/4L x 1-3/8W Inch
• Surface Mount
• Rear Clearance
• Peterson

14-1/4" Long x 1-3/16" tall x 1-5/16 deep. Waterproof identification light bar with 3 replaceable red 3-LED lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. Surface mount. Single-wire design.

• Clearance Lights
• ID Bar
• Red
• 14L x 1W Inch
• Surface Mount
• Rear Clearance
• Submersible Lights
• Optronics

20-1/2" x 1". 4-Function, waterproof light bar acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail. DOT compliant. 19 Diodes.

• Tail Lights
• Strip Light
• Red
• 20-1/2L x 1W Inch
• Surface Mount
• Stop/Turn/Tail/Backup
• Submersible Lights
• Optronics

17" Long x 1-3/8" tall x 1" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.

• Clearance Lights
• ID Bar
• Red
• 17L x 1-1/2W Inch
• Surface Mount
• Rear Clearance
• Submersible Lights
• Optronics

14-15/16" Long x 1-3/16" tall x 1" deep. Waterproof identification light bar with three 3/4" diameter red LEDs is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount. 2-Wire pigtail.

• Clearance Lights
• ID Bar
• Red
• 15L x 1-1/2W Inch
• Surface Mount
• Side Marker
• Submersible Lights
• Optronics

14-1/4" x 1-3/16" x 1-1/16". Waterproof identification light bar with 3-LED lights is designed for trailers wider than 80". Durable stainless steel base. Surface mount - hardware not included. 1-Wire design.

• Clearance Lights
• ID Bar
• Red
• 14-1/4L x 1-3/16W Inch
• Surface Mount
• Rear Clearance
• Peterson

14-1/4" Long x 1-3/16" tall x 1-5/16 deep. Waterproof identification light bar with 3 replaceable red 3-LED lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. Surface mount. Male 0.180 bullet.

• Clearance Lights
• ID Bar
• Red
• 14L x 1W Inch
• Surface Mount
• Rear Clearance
• Submersible Lights
• Optronics

Waterproof trailer light kit with (3) 3/4" diameter lights that work as identification lights when properly mounted on trailers over 80" wide. Recessed mount with included grommets. 29" Long insulated wiring harness. PC rated.

• Clearance Lights
• ID Bar
• Round
• Red
• 3/4 Inch Diameter
• Recessed Mount
• Rear Clearance
• Submersible Lights
• Optronics

16-1/2" Long x 1-3/8" tall. Waterproof identification light bar with 3 lights is designed for trailers wider than 80" Durable stainless steel base. Surface mount to trailer - hardware not included. 2-Wire design with 50" leads.

• Clearance Lights
• ID Bar
• Red
• 17L x 1-1/2W Inch
• Surface Mount
• Rear Clearance
• Submersible Lights
• Optronics

Haul your large boat trailer safely, with this 12-15/16" x 2", submersible, V-shaped identification light. When attached to the back of your trailer, this red light indicates to other drivers that your trailer is 80" or wider.

• Clearance Lights
• ID Bar
• Red
• 12-15/16L x 2W Inch
• Surface Mount
• Rear Clearance
• Submersible Lights
• TecNiq

Haul your large boat trailer safely, with this 12-15/16" x 2", submersible, V-shaped identification light. When attached to the back of your trailer, this red light indicates to other drivers that your trailer is 80" or wider.

• Clearance Lights
• ID Bar
• Red
• 12-15/16L x 2W Inch
• Surface Mount
• Rear Clearance
• Submersible Lights
• TecNiq

14-1/4" Long x 1-1/8" wide x 7/8" deep; sealed, waterproof, 1-piece housing and lens; surface mount on 8-1/2" centers; 2-wire design; 3 red LEDs; red lens.

• Clearance Lights
• ID Bar
• Red
• 14L x 1W Inch
• Surface Mount
• Rear Clearance
• Submersible Lights
• Optronics

2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Single wire design. P2 rated.

• Clearance Lights
• Rectangle
• Amber
• 2L x 1W Inch
• Surface Mount
• Rear Clearance
• Side Marker
• Submersible Lights
• Optronics

This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.

• Tail Lights
• Kit
• Rectangle
• Red and Amber
• 8L x 3W Inch
• Surface Mount
• License Plate
• Rear Clearance
• Rear Reflector
• Side Marker
• Side Reflector
• Stop/Turn/Tail
• Submersible Lights
• Optronics

3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. P2 rated. 10 Diodes.

• Clearance Lights
• Rectangle
• Red
• 3-7/8L x 1-1/4W Inch
• Surface Mount
• Rear Clearance
• Side Marker
• Submersible Lights
• Optronics

16" Long x 1-1/2" tall x 1-5/8" thick. Waterproof, incandescent identification light bar is designed for trucks and trailers. Durable polycarbonate housing and lens. Surface mount. 2-Wire pigtail with 50" leads. P2 Rated.

• Clearance Lights
• ID Bar
• Red
• 16L x 1-1/2W Inch
• Surface Mount
• Rear Clearance
• Submersible Lights
• Optronics

15-1/2" x 1-3/16" x 1-3/8". Low-profile identification light bar is designed for trailers wider than 80". Durable steel base with black enamel finish. Surface mount to trailer - hardware not included. 1-Wire design. DOT approved.

• Clearance Lights
• ID Bar
• Red
• 15-1/2L x 1-3/16W Inch
• Surface Mount
• Rear Clearance
• Non-Submersible Lights
• Peterson